Line TC-01 · ore conveying | Shop Engenharia · Porto Alegre/RS · since 1982 Continuous monitoring

TDIS · 3D · >98%
RX-F · 1.6 mm
CAM-4K · real time
RX-M · NDT

Official DMC Technology representative in Brazil

Every metre of belt, under reading.

3D scanning, X-ray and laser inspection running continuously. The fault shows up in the report before it shows up on the line, and maintenance stops being corrective.

Talk about your project Talk on WhatsApp

CAM-01 · TDISLive

DMC Technology TDIS system in operation: a blue laser line scanning the surface of a conveyor belt inside a transfer gallery

3D laser scanning · conveying gallery

1982 Founded · Porto Alegre

>98% Recognition rate

IP67 TDIS protection rating

24/7 Continuous operation

Four decades of engineering,
one official representation.

Shop Engenharia was founded in 1982 in Porto Alegre, serving operations that run at scale: mining companies, ports, steel mills, cement plants and large agro-industrial facilities. That is more than forty years designing, executing and maintaining electrical, hydraulic, insulated-panel and structural engineering inside the client plant.

In 2026 the company took a strategic step and became the sole official DMC Technology representative in Brazil, bringing to the country the conveyor belt monitoring and inspection systems used by mining, port and steel operations in several countries.

Shop arrives with both halves: the manufacturer technology and the track record of a company that has already worked inside the plant.

Read our history

TDIS scanning head installed under a conveyor belt, with the blue laser beam crossing the belt

44 years In the market

1600+ Projects delivered

1st DMC representative in Brazil

5.0 Google rating

DMC engineers and mine crew mounting the assembly over the belt.

DMC Technology official blog

Two 3D rip detection systems
going into a mine in Brazil.

On September 8 the DMC installation team started mounting two 3D belt rip monitoring systems on two conveyor belts at an open-pit mine in Brazil. The job was expected to take three days.

In the article, DMC thanks the mine team for support with site access, equipment logistics and installation arrangements.

The two systems will let the mine monitor belt damage in real time and reduce the risk of unexpected conveyor belt failures.
DMC Technology · from the original article

Shop Engenharia is the official DMC Technology representative in Brazil.

Read the article on the DMC site

Opens the manufacturer site, in English.

In the control room, the system software on screen.

Scanner head mounted under the belt, on the line.

Official representation

The partnership that redefined what we do

As the official DMC Technology representative in Brazil, Shop Engenharia brings to the country 3D, X-ray and laser conveyor belt monitoring systems. It is technology used by the largest players in global mining, now with local technical support and nationwide deployment.

Explore DMC technology

Record 02 · detection event

Two channels,
the same event.

CH-01 · visual

Photograph of a longitudinal tear on the surface of a conveyor belt

CH-02 · TDIS 3D

3D point-cloud reconstruction of the same tear, generated by the TDIS system

A longitudinal rip starts at two millimetres. On the visual channel it is only a shadow on the rubber, and by the time the operator sees it, the belt has already torn.

On the TDIS channel the same defect arrives measured: depth, width, position on the belt and a time stamp. It is filed in the plant history, with an image.

That is what separates finding the fault during downtime from scheduling the replacement while the line keeps running.

2 mmMinimum width

50 mmMinimum length

9.6 m/sMax belt speed

Instrumentation available in Brazil

Five reading
points.

Each DMC system joins the line as an instrument with a tag, a measuring range and a state. The figures below come from the manufacturer catalogue, with model and range.

ZZS127 · 3D

3D longitudinal rip scanning

Continuous 3D laser scanning of the belt surface. It detects longitudinal rips and surface damage before they become catastrophic failure, and records a full digital history for traceability.

>98%Recognition

2 mmMinimum rip

≤ 9.6 m/sBelt speed

IP67Protection

3D scanning head installed under a conveyor belt, with a blue laser beam

KJ581-F · fixed

Fixed X-ray

Permanent installation beside the conveyor, X-raying the belt internal structure including steel cords and splices, without stopping the operation.

1.6 × 1.6 mmResolution

≤ 9.6 m/sBelt speed

≤ 2.2 mBelt width

IP57Protection

KJ581-M · mobile

Mobile X-ray

The same inspection as the fixed model, in a smaller and lighter set the crew takes to different points of the line with no civil works.

1.6 × 1.6 mmResolution

50% smallerVs. the fixed

No civil worksInstallation

IP57Protection

DMC mobile X-ray set with detection bar, control boxes and cabling

YSX-12 · handheld

Handheld X-ray scanner

Operated by one person with the belt stopped. It checks vulcanised splice quality and confirms in the field the damage the fixed system flagged.

≤ 30 mmPenetration

22 kgWeight with case

BluetoothTransmission

75 kVTube voltage

DMC handheld X-ray scanner packed in a field case

KJ1766 · position

Belt speed and positioning

It tracks belt speed and position in real time and stops the conveyor at the exact maintenance point, using radio-frequency tags.

0–10 m/sRange

≤ 1 mStopping accuracy

60 cmTag range

IP54Protection

See all six systems

Video archive · 02 records

The technology
in operation.

Where Shop
gets to work.

Mining & DMC technology

3D, X-ray and laser monitoring of conveyor belts. The fault is detected before it becomes production downtime.

See the systems

Industrial engineering

Electrical, hydraulic, insulated panels, structures and maintenance. It is the foundation Shop has stood on for over four decades.

About Shop

Industrial engineering projects Shop delivered for:

Who we serve:
operations that cannot stop.

Where the conveyor belt is a critical asset and one hour of downtime costs more than the whole system, inspection has to be continuous. That is Shop's client.

Mining and pelletising

Long-distance belts carrying raw and processed ore, 24 hours a day in an abrasive environment.

Ports and terminals

Dry bulk handling at port terminals, with short maintenance windows and high cargo turnover.

Steel and metallurgy

Continuous transport of raw material and coke, under heat and load that punish the belt carcass.

Cement plants

Aggregates and clinker in continuous duty, where a stopped belt stops the whole kiln.

Agribusiness and private terminals

High-volume grain and fertiliser handling, with harvest peaks that leave no room for corrective maintenance.

General industry

Plants that depend on continuous conveying and need the same inspection rigour as mining.

What they say
about us.

5.0 3 Google reviews · all five stars

Shop has always looked after me very well. Competent professionals and excellent solutions. I recommend them.

Silvana Martins De AlmeidaGoogle review · translated

A company with many years of great service, a lot of credibility in the market, honest and high-quality work. I highly recommend their services.

Edwilson MedeirosGoogle review · translated

Quality in the products and services you supply is your trademark. Congratulations!

Fernando TroianGoogle review · translated

Where Shop is:
come and see it.

The head office is in Porto Alegre and it is open for technical visits. Service covers all of Brazil: the team travels to the plant, wherever the belt is.

Av. Manoel Elias, 2365 - Passo das Pedras, Porto Alegre - RS, 91240-261
Head office
All of BrazilCoverage
Monday to Friday, 8:30am to 6pmOpening hours
+55 51 99683-7142WhatsApp

Get directions

Map · Passo das Pedras, Porto Alegre

Your operation does not stop.
Neither does our engineering.

Tell us the line, the belt width and the speed. We come back with the right system, the proposal and the deployment schedule.